Air barrier systems – Combinations of air barrier assemblies and air barrier components, connected by air barrier accessories, that are designed to provide a continuous barrier to the movement of air through an environmental separator, which has an air leakage rate no greater than 2.00 L/(s•m²) at a pressure difference of 75 Pa when tested in accordance with ASTM E 779 or CAN/CGSB 149.10 or CAN/CGSB 149.15.

Sheet Waterproofing Membrane – Sheet membrane systems are reliable and durable thermoplastic waterproofing solutions that can fulfill the requirements of even the most demanding below-ground structures, including those exposed to highly aggressive ground conditions and stress.

Fluid-Applied Water Barrier – is the process of making a surface or object water resistant in given conditions by applying a liquid coating to it. The liquid coatings, whether single-or multiple-component, are easy to apply and provide long lasting protection to metals, wood, concrete and other surfaces.

Drain & Protection Board – is the first line of defense for fluid-applied waterproofing materials, which can be used with or without waterproofing on the concrete wall. These dimpled plastic sheets are available from several manufacturers and come in various length rolls, ranging from 4 feet to 9 feet 9 inches tall.

Urethane Crack Injection / Repair – is an economical method of repairing non-moving cracks in concrete walls, slabs, columns, and piers and is capable of restoring the concrete to its pre-cracked strength. Prior to doing any injection, it is necessary to determine the cause of the crack.

Urethane Traffic Topping / Deck Coating Systems – utilizes single component, moisture-cured elastomeric urethane waterproofing system designed for pedestrian traffic. It is a monolithic system, designed to waterproof concrete and plywood surfaces by excluding moisture penetration during low-temperature exposure as well as high temperature, high humidity thermal cycling.

Caulking – Waterproofing and caulking systems are available for roofs, basements, and just about anywhere there is moisture infiltrating the building. Many property owners experience issues with dampness in their basements and below-grade foundations due to water leaching through the walls or the basement floor. Also, buildings with flat or low-sloped roofs may have issues with water. The waterproofing methods used will depend on the nature and location of the problem.

Water Barrier Seal Coatings – are clear or pigmented coatings labeled and formulated for application to above-ground concrete and masonry substrates to provide protection from water and waterborne contaminants, including, but not limited to, alkalis, acids, and salts.